Friday, February 24, 2023

Battery swapping

Battery swapping[edit]

Instead of recharging EVs from electric sockets, batteries could be mechanically replaced at special stations in a few minutes (battery swapping).

Batteries with greater energy density such as metal-air fuel cells cannot always be recharged in a purely electric way, so some form of mechanical recharge may be used instead. A zinc–air_battery, technically a fuel cell, is difficult to recharge electrically so may be "refueled" by periodically replacing the anode or electrolyte instead.[79]

Dynamic charging[edit]

Dynamic charging technologies tested in Sweden[80][81][82]
Type
(and developer)
Power per
receiver
(and power
pending further
development)
Million SEK
per km road
both ways
References
Overhead power
lines
 (Siemens)
650 kW
(1000 kW)
12.4[80]: 140–144 
[81]: 23–24, 54 
Ground-level power supply
through in-road rail
(Elways and NCC consortium)
200 kW
(800 kW)
9.4-10.5[80]: 146–149 
[81]: 21–23, 54 
Ground-level power supply
through on-road rail
(Elonroad and ABB consortium)
150 kW
(500 kW)
11.5-15.3[81]: 25–26, 54 
Wireless power transfer
through in-road
inductive coils (Electreon)
25 kW
(40 kW)
19.5-20.8[80]: 171–172 
[81]: 26–28, 54 

TRL (formerly Transport Research Laboratory) lists three power delivery types for dynamic charging, or charging while the vehicle is in motion: overhead power lines, and ground level power through rail or induction. TRL lists overhead power as the most technologically mature solution which provides the highest levels of power, but the technology is unsuitable for non-commercial vehicles. Ground-level power is suitable for all vehicles, with rail being a mature solution with high transfer of power and easily accessible and inspected elements. Inductive charging delivers the least power and requires more roadside equipment than the alternatives.[80]: Appendix D 

The European Commission published in 2021 a request for regulation and standardization of electric road systems.[83] Shortly afterward, a working group of the French Ministry of Ecology recommended adopting a European electric road standard formulated with Sweden, Germany, Italy, the Netherlands, Spain, Poland, and others.[84] The first standard for electrical equipment on-board a vehicle powered by a rail electric road system (ERS), CENELEC Technical Standard 50717, has been approved in late 2022.[85] Following standards, encompassing "full interoperability" and a "unified and interoperable solution" for ground-level power supply, are scheduled to be published by the end 2024, detailing complete "specifications for communication and power supply through conductive rails embedded in the road".[86][87]

--
You received this message because you are subscribed to the Google Groups "1top-oldtattoo-1" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1top-oldtattoo-1+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/1top-oldtattoo-1/CAMm_%2BybcXd7iMP8nF0_3y2XPMRmwiC9eAvC9BShCrWVg_0y5Xg%40mail.gmail.com.

No comments:

Post a Comment

Electronics Computer

Are you currently in search of a job? Look no further! Americas Technician Services is always on the lookout for talented individuals like y...